To find a misfire, just follow these four steps!

• Start the A.C.E software on your computer.
• Select the manufacturer and engine type.
• Connect one lead to an ignition reference for #1 cylinder and connect the other lead to the oxygen sensor of the bank you want to test or to the FirstLook Sensor in the tailpipe.
• Click Start. It’s that simple!

A.C.E. shows the cylinder that’s misfiring, gives you suggestions for fixing the misfire, and even provides a report of before and after results that you can give to your customers.  A.C.E. provides you the power of knowledge based on years of research.

The A.C.E. Misfire software doesn't require any complicated equipment.  All is required is an ADC-212 series oscilloscope or an automotive USB oscilloscope(PS3423).  To check through the tailpipe the FirstLook Pulse Sensor is required.

PC Requirements:

• Processor: Pentium class processor or equivalent.
• Memory: 32 MB minimum
• Disk space: 10 MB minimum
• Operating system: Microsoft Windows 98 SE, ME, 2000, XP or later.
• Ports: For the PS3000 units (USB 1.1 compliant port minimum. USB 2.0 compliant port recommended. PC oscilloscope must be connected direct to the port or a powered USB hub.) The ADC-212 series requires a LPT port or you can purchase #PP196 USB-Parallel adapter)