The TA050 attenuator set consists of four coaxial attenuators designed for
use with signals up to 1 GHz. Each attenuator has a male and a female BNC
connector.Usage note :
The TA050 attenuators must be used with a matched 50-ohm source and load.
If you wish to attenuate a signal before feeding it into a high-impedance
measuring instrument, you must add a 50-ohm feedthrough terminator such as
the Pico Technology TA051 feedthrough terminator.
Figure 1: Using with a 50 Ω load
Figure 2: Using with a high-impedance load such as an
oscilloscope, spectrum analyser or frequency counter
|
Bandwidth |
DC to 1 GHz |
|
Attenuation |
3 dB, 6 dB, 10 dB, 20 dB |
|
Maximum power
dissipation |
1 W |
|
Input impedance |
50 Ω |
|
Output impedance |
50 Ω |
|
VSWR |
1.5:1 or better |
|
Dimensions |
56 x 20 x 17 mm (approximately
2.2 x 0.8 x 0.7 in) |
|
Connectors |
BNC, 1 male + 1 female |
|
Construction |
Shielded inner box with plastic
shell |
|
Weight |
24 g (approximately 0.85 oz) each |
