Model Number | PS 3204 | PS 3205 | PS 3206 | PS 3224 | PS 3424 |
Bandwidth | 50MHz | 100MHz | 200MHz | 10MHz | 10MHz |
Sampling Rate (repetitive signals) | 2.5GS/s | 5GS/s | 10GS/s | | |
Sampling Rate (single shot) | 50MS/s | 100MS/s | 200MS/s (single channel) 100MS/s (dual channel) | 20MS/s (single channel) 10MS/s (dual channel) | 20MS/s (single channel) 10MS/s (2 channels) 5MS/s (3 or 4 channels) |
channels | 2 + Ext Trigger | 2 | 4 |
Oscilloscope Timebases | 5 ns/div to 50 s/div | 2 ns/div to 50 s/div | 1 ns/div to 50 s/div | 500 ns/div to 20 s/div |
Timebase Accuracy | 50 ppm | 100 ppm |
spectrum ranges | 0 to 25MHz | 0 to 50MHz | 0 to 100MHz | DC to 10MHz |
Dynamic Range | 50 dB | 72 dB |
Signal Generator | Fixed 1 kHz square wave | Fixed amplitude, variable frequency sine/square/triangle wave with single/dual slope sweep options. Maximum frequency 1 MHz | none |
Trigger Modes | Free Run, Auto, Repeat, Single and Save To Disk On Trigger |
Pre/Post Trigger | -100% to +100% |
Buffer Size | 256k | 512k | 1M | 512k | 512k |
Resolution | 8 bit | 8 bit | 8 bit | 12 bit | 12 bit |
Accuracy | ±3% | ±1% |
Ranges | ±100 mV to ±20 V | ±20 mV to ±20 V in 10 ranges |
Inputs | 1 MΩ Impedance, AC/DC Coupling, 20pF capacitance |
Overload Protection | ±100 V (signal input) ±30 V (signal generator/external trigger) ±50 V (between grounds) | ±100 V |
| Environmental | 0°C to 70°C (25°C for quoted accuracy), 25% to 75% RH | 0°C to 70°C (20°C to 30°C for quoted accuracy) 25% to 75% RH |
PC Connection | USB 2.0 (USB 1.1 compatible) - cable supplied |
Power Supply | From USB Port* | From USB Port |
Dimensions | 140 x 190 x 45 mm |
Supplied Software | PicoScope (oscilloscope, spectrum analyzer, meter), PicoLog (data logger), Drivers and examples (C, Delphi and Visual Basic, Labview, Agilent VEE6.1 and Excel.)
Software is supplied on CD. |
PC Requirements | Processor: Pentium class processor or equivalent.
Memory: 32 MB minimum
Disk space: 10 MB minimum
Operating system: Microsoft Windows 98 SE, ME, 2000, XP or later.
Ports: USB 1.1 compliant port minimum. USB 2.0 compliant port recommended. Must be connected direct to the port or a powered USB hub. |
